Actuators
Get the information you need to install and maintain your trailer’s actuator. Find your actuator model below for installation instructions, service manuals, how-to videos, and more.
-
-
Model 850E Actuator
-
Model 750E Actuator
-
Model 85, 85-3/4 & 85E Actuator
-
Model 70LP Actuator
-
Model 125 Actuator
-
Model 660E Actuator
-
Model 70 & 70E Actuator
-
Model 66 Actuator
-
Model 80LP Actuator
-
Coupler adjustment instructions for Tie Down actuator models 660, 750 and 850 with quick latch feature.
-
How can I figure out the proper hitch height for my vehicle?
-
Technical Service Bulletin for Tie Down/Dexter Marine of Georgia Model 70LP Actuator.
-
Installation Instructions and Owner’s Manual for Titan Model 20 Actuator.
-
Installation Instructions and Owner’s Manual for Tie Down Model 20 Raptor
-
Installation Instructions and Owner’s Manual for Titan Model 6 Surg-o-matic Actuator.
-
Installation Instructions and Owner’s Manual for Tie Down Model 16.5 Raptor
-
Installation Instructions and Owner’s Manual for Tie Down Model 14.5 Raptor
-
Technical Service Bulletin for LP750 (70480) Low Profile Actuator.
-
Manual Bleeding Instructions for Titan Model 10 & Model 20 Actuators.
-
Master Cylinder Rebuild Kit Instructions for Model 660, 700/750 and 800/850 Actuators.
-
Installation Instructions and Service Manual for Model 80LP/85LP Bullet Actuator.
-
How do I hitch my trailer with the Model 660E, 750E, 850E actuator?
-
How does a “surge” actuator work?
-
What type of brake fluid should I use in my actuator?
-
How do I lock the coupler while hitched to my tow vehicle?
-
How do you know if the emergency breakaway has been pulled on my actuator?
-
How often should I change the brake fluid in my actuator?
-
How much brake fluid should I put in my actuator?
-
How do I prevent braking action on my actuator when brakes aren’t required?